Thread Depth Gauge

The new line-up corresponding to a major revision of ISO and JIS standards of rubber hardness measurement Durometer (rubber, plastic hardness tester) represents to quantify the degree of hardness of soft materials such as rubber. Now, there is a large revision to JIS standard and ISO standard, way of details and hardness measurement of rubber hardness tester has been some changes. As a comprehensive manufacturer of soft material hardness measuring instrument, as well as rubber and plastics, we will propose the hardness measurement method of a number of soft material and elastic body.

Measuring parallel body, centering and runout of parts with high sensitivity Other dimensions and parallelism-centering of the workpiece, deflection measurement of the rotation axis and turning of the machine, parallel out of the table surface of the machine. Its applications are many and diverse. Its features is that sensitivity is good for the fine size displacement compared to standard dial gauge. Since the leg-like measuring element has a tip sphere, it can be measured in a narrow portion where a tip (standard φ2mm ultra hard ball) enters. The gauge head is provided in φ0.6mm, φ0.8mm, φ1.0mm in addition to the standard.

Lineup inherited a "precision" "stability" "heavy-duty" of cultivated watchmaking to its founding era In the production site that you need to check the dimensional accuracy, dial gauge has been always used. Scale interval (1 scale), depending on the intended use, are 0.0005mm, 0.001mm, 0.005mm, 0.01mm, 0.05mm, 0.1mm, 6 kinds exhaustive. The measurement range is from a minimum 0.08mm to 150mm. The dial gauge is usually not used alone, to secure the stem portion / rear part on a jig. Work is sandwiched between the measuring table and measuring element, it reads the amount of displacement in the short hand and minute hand. Its application are direct measurement to be measured by the actual dimensions, and comparative measurement to read the amount of displacement from the phrase reference dimension.

Dedicated to measuring depth of hole/groove, and step of dies, etc. It is a dedicated instrument for measuring the difference in level and depth of the work piece in handy. The bottom surface of the base is brought into close contact with the measurement origin (zero point). Then the outer frame by rotating to align the zero position (to secure the outer frame by a clamp at that time). The amount that the probe was protruding from its position is read by the hour hand and minute hand. There are two types of analog and digital. Shape and the base of the size of the probe is also supported by the application. In response to the depth of the measurement section, stroke has each standard model of 10mm / 20mm / 30mm. To attach the connecting legs, you can compare and measure the depth of up to 220 ~ 240 mm by performing a reference point alignment using a block gauge.

Measuring the thickness of the paper, small parts or film, easily by sandwiching Compared to the dial gauge for use in mounting the fixture, thickness gauge is held by hand, sandwiched workpiece between the gauge head and the anvil, reads the value directly. The probe is raised by pushing down the lifting lever, it will return to the original zero point by releasing the lever. Since the operation is simple, even compared such as a micro-meter, it can be measured in a short period of time. In both analog and digital, there are two types of scale, 0.01mm and 0.001mm, and stroke models are up to a maximum thickness of 50mm depending on the size of the work. It can be used in a wide range of applications for small molded parts such as paper, hair, rubber plate and metal tube.