Menu
Calibration system complete 7794-2 Sets
The electronic perfectControl® calibration system No. 7794-2 with motorised drive significantly reduces the effort and time required for calibrations and adjustments of torque wrenches.
- measures without shifting the point of application of force
- avoid inaccurate measurements with the precise bearing spindle and the fine-controlled motor
- extremely precise calibration thanks to optimisation of the bearings and the square drives of the transducers
- clicking and indicating torque wrenches can be calibrated
- quick and easy switching of transducers with QuickRelease locking system
- bridge support with an eccentric clamp designed for single-handed operation reduces time and effort
- automatic transfer of measured values via USB interface to PC for further processing and archiving
- a calibration certificate can be printed and/or saved as a PDF file after calibration
- ‘as found’ and ‘as left’ calibrations can be documented
- DIN EN ISO 6789 calibration is supported in numerous languages. Additional standards and factory specifications available upon request
- calibrations up to 1,000 N·m with easy-to-assemble extension No. 7791-1.
- calibration of transducers with torque reference wrench is possible on request
- the interface adaptor set 7761/3 is required for automated calibration of electromechanical torque wrenches and screwdrivers (730D eClick, 714, 766 DAPTIQ®, TORSIOTRONIC®, TORSIOTRONIC® DAPTIQ®)
- registered design
- protected by national and international patents
- torque wrench and laptop not included
Description
| Product no. | Model | for transducers | Length mm (L) | Width mm (b) | Height mm (h) | Range N·m | Functional length (LF) max. mm | Profile width | Weight (g) | Number of tools |
|---|---|---|---|---|---|---|---|---|---|---|
| 96521078 | 7794-2 Sets | 7728 (size 1-100) | 1200 mm | 800 mm | 820 mm | 1-400 N·m | 815 mm | 180 mm | 71300 g | 23 |
| 96521079 | 7794-2 Sets | 7728 (size 1-100) | 1200 mm | 800 mm | 950 mm | 1-1000 N·m | 1390 mm | 180 mm | 76300 g | 24 |
Technologies and features
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
Contents:
1 motorised calibration and adjustment system No. 7794-2
4 transducers (96521078: 3 transducers)
Calibration accessory set:
6 calibration square drive insert tools No. 734K: Size 4; 5; 12; 20; 40; 100
6 square drive adaptors No. 409M, No. 7787, No. 7788, No. 7789, No. 7789-4, No. 7789-5
1 USB adaptor No. 7757-1
1 jack cable No. 7751
1 jack-push/pull cable No. 7752
1 jack-push/pull cable No. 7751-3
1 power adaptor set
1 hex L-Key No. 10760: 2 mm
