Menu
Calibration system complete 7794-1 Sets
The perfectControl® calibration system with manual drive reduces the effort and time required for calibrations and adjustments of torque wrenches.
- measures without shifting the point of application of force
- avoid incorrect measurements with the precise bearing spindle and ergonomically shaped handwheel
- extremely precise calibration thanks to optimisation of the bearings and the square drives of the transducers
- clicking and indicating torque wrenches can be calibrated
- quick and easy switching of transducers with QuickRelease locking system
- bridge support with an eccentric clamp designed for single-handed operation reduces time and effort
- automatic transfer of measured values via USB interface to PC for further processing and archiving
- a calibration certificate can be printed and/or saved as a PDF file after calibration
- ‘as found’ and ‘as left’ calibrations can be documented
- DIN EN ISO 6789 calibration is supported in numerous languages. Additional standards and factory specifications available upon request
- calibrations up to 1,000 N·m with easy-to-assemble extension No. 7791-1.
- calibration of transducers using torque reference wrenches is possible on request
- the interface adaptor set 7761/3 is required for automated calibration of electromechanical torque wrenches and screwdrivers (730D eClick, 714, 766 DAPTIQ®, TORSIOTRONIC®, TORSIOTRONIC® DAPTIQ®)
- protected by national and international patents
Description
| Product no. | Model | Length mm (L) | Width mm (b) | Height mm (h) | Range N·m | Weight (g) | Number of tools |
|---|---|---|---|---|---|---|---|
| 96521076 | 7794-1 Sets | 1200 mm | 800 mm | 950 mm | 1-400 N·m | 60100 g | 21 |
| 96521077 | 7794-1 Sets | 1200 mm | 800 mm | 820 mm | 1-1000 N·m | 101700 g | 23 |
Technologies and features
DKD-R 10-8 / DIN 51309
Our transducers for torque wrenches and torque testers are professionally calibrated in our DAkkS-accredited calibration laboratory. Depending on requirements, this is done either with a calibration certificate within the scope of our accreditation (according to DKD-R 10 8 or DIN 51309) or with a factory calibration certificate based on these guidelines.
Contents:
1 manual calibration system No. 7794-1
4 transducers (96521076: 3 transducers)
Calibration accessory set:
6 calibration square drive insert tools No. 734K: Size 4; 5; 12; 20; 40; 100
6 square drive adaptors No. 409M, No. 7787, No. 7788, No. 7789, No. 7789-4, No. 7789-5
1 USB adaptor No. 7757-1
1 jack cable No. 7751
1 jack-push/pull cable No. 7752
1 jack-push/pull cable No. 7751-3
1 hex L-Key No. 10760: 2 mm
included USB adaptor with TorkMaster software No. 7731-1
