Wheel change set 750NR/200/3/1
- Solid standard equipment for quick and stress-free wheel changes – ideal for use in workshops and for private use.
- With its SevenFiveZero torque wrench with 1/2″ fine-tooth ratchet and 3 wheel nut sockets (size 17, 19, 21) with plastic sleeve, the set ensures maximum protection on sensitive alloy wheels.
- Clearly audible and tangible “click” when the target torque is reached, which can be conveniently and precisely adjusted via a rotary knob at the end of the handle (1 turn = 10 N·m).
- The extension and the wheel nut sockets with a ball lock ensure high power transmission, even for difficult or low-lying bolted connections.
- Sturdy plastic case with carrying handle and custom-fit inlay for safe transport and storage.
| Product no. | Model | Measuring range N·m | Measuring range ft-lb | Scale division N·m | Scale division ft-lb | Fine scale division | Length mm (L) | Width mm (b) | Height mm (h) | Number of tools | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 96507216 | 750NR/200/3/1 | 40-200 N·m | 30-150 ft·lb | 10 N·m | 20 ft·lb | 0,5 N·m | 680 mm | 81 mm | 66 mm | 5 | 2940 g |
Technologies and features
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change. In transducers: The QuickRelease safety lock helps you to quickly mount and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons.
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Spring mechanism with the ‘click’
Our torque wrench uses a toggle lever as the switching mechanism. When the set torque is reached (click-type), the spring force is exceeded, causing the mechanism to slip and strike. This produces a clearly audible and perceptible ‘click’.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
Properties
- high-quality tool set specially designed for wheel changes
- with fixed, reversible 1/2″ fine-tooth ratchet
- in a sturdy plastic box
Key features of torque wrench No. 750NR/200 (SevenFiveZero)
- tactile with dual stop signal
- 60 teeth
- resilient, long-lasting spring mechanism
- fast, precise adjustment with QuickSelect quick adjustment
- trigger mechanism insensitive to continued loading after triggering, and loosening of already tightened joints (up to the maximum range limit of the torque wrench)
- locking of the specified torque setting
- dual scale N·m/ft·lb
- ready for operation again immediately after release
- calibration with perfectControl® calibration device No. 7791, 7794 or calibration system No. 7706
- for controlled clockwise tightening
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- max. measurement error ± 4 %
Contains 5-pieces:
1 torque wrench with ratchet 1/2″ No. 750NR/200: measurement range: 40-200 N·m; 30-145 ft·lb
3 IMPACT wheel nut sockets No. 51IMP K: 17 mm (green); 19 mm (blue); 21 mm (red)
1 extension, 1/2″ No. 509/5: L. 130 mm
