VDE torque wrench MANOSKOP® 730R VDE
- tactile dual stop signal
- with 3/8″ ratchet insert (tool holder 9 x 12 mm)
- replace the ratchet adapter 725QR VDE without having to check the insulation again
- no reset to “0” required, since measuring element is only loaded during tightening
- with QuickRelease safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- protective insulation according to IEC 60900-AC 1.000 V / DC 1.500 V
- with insulating sleeve made of glass-fibre reinforced polyamide plastic
- the insulation is resistant to many liquids such as alkalis, fuels or oils
- double scale of N·m/ft·lb resp. N·m/in·lb
- low-wear triggering mechanism
- readjustment without disassembly and without checking the insulation again
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 3%
| Product no. | Model | Size | Tool holder size [internal square] | Measuring range N·m | Measuring range ft-lb | Measuring range in-lb | Scale division N·m | Scale division ft-lb | Scale division in-lb | Fine scale division | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | LF | SF | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 96550125 | 730R VDE | 2,5 | 9 x 12 mm | 4-25 N·m | – ft·lb | 40-220 in·lb | 2 N·m | – ft·lb | 10 in·lb | 0,2 N·m | 3/8 | 337 mm | 35 mm | 45 mm | 30 mm | 56 mm | 253,5 mm | 28 mm | 1030 g |
| 96550150 | 730R VDE | 5 | 9 x 12 mm | 10-50 N·m | 7-37 ft·lb | – in·lb | 5 N·m | 1 ft·lb | – in·lb | 0,25 N·m | 3/8 | 391,5 mm | 35 mm | 45 mm | 30 mm | 56 mm | 308,5 mm | 28 mm | 1140 g |
Technologies and features
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change. In transducers: The QuickRelease safety lock helps you to quickly mount and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons.
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that the spring does not need to be reset to ‘0’ after use.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
