Menu
Pipe wrench torque wrench 721/30Q 18″ HD
- Robust torque wrench with permanently integrated STILLSON pipe wrench for precise work, e.g. on pipe screw connections, reinforcing bars, hydraulic connections or bolted joints on reinforcing bars.
- When the cycle is triggered, a strong tactile and audible ‘click’ (dual stop signal) is heard.
- 5 selectable torque values, depending on the diameter, for safe, controlled tightening without over-tightening.
- Lightning-fast and precise adjustment of the torque.
- Precise machining of the thread and adjusting nut of the pliers enables exact positioning and reduces unwanted adjustment.
Description
| Product no. | Model | Measuring range N·m | Length mm (L) | Width mm (b) | Height mm (h) | Weight (g) |
|---|---|---|---|---|---|---|
| 50184102 | 721/30Q 18″ HD | 180; 220; 270; 300; 350 N·m | 730 mm | 90 mm | 90 mm | 4100 g |
Technologies and features
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol.
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that the spring does not need to be reset to ‘0’ after use.
Properties
- with permanently installed 18″ STILLSON pipe wrench
- clicking type with dual stop signal
- no reset to ‘0’ required
- the measuring element is only loaded during the tightening process
- Quick adjustment via easy-to-operate clamping lever in the handle
- adjustment element with thumb recess prevents slipping for quick torque adjustment
- 5 selectable torque values: 180; 220; 270; 300; 350 N·m
- clicking mechanism insensitive to further and counter loads (max. up to the measuring range limit of the torque wrench)
- calibration with the perfectControl® calibration systems No. 7791, No. 7794 or the calibration system No. 7706
- simple adjustment from the external side via 2 adjustment screws without dismantling
- for controlled right-hand tightening
- with 2-component handle
- calibration certificate according to DIN EN ISO 6789-2:2017
- accuracy ± 4 %
