Affri Motorised Brinell Hardness Tester – LD3000 Series

ONE BUTTON MEASUREMENTS

Brinell hardness testers LD3000 are motorized systems with automatic test forces up to 3000 kgf. Affri hardness testers achieve the highest level of load accuracy and measurement resolution available for Brinell tests. Thanks to the AFFRI System, the real indentation measurement is guaranteed without any external interference and also in any condition.

How does it work?

1. Spin the screw handle and bring your sample to make contact with the clamping hood blocking the piece;
2. Press the START button and the measuring head approaches the sample, applies the load to perform the indentation and goes back upward.
3. After the automatic indentation measurement, the result appears on the display.

And that’s it, all in automatic succession without breaching a phase. The hardness test is easy and fast, it can be done by any operator, without any special training.

SPECIMEN AUTO-CONTACT FROM ANY DISTANCE

Fully motorized vertical testing stroke including automatic contact with test surface with single start input. The activation of the test cycle is automatic, it starts when the head makes contact with the specimen which is automatically recognized at any position within the vertical stroke.

Vertical capacity from base to the indenter 300mm / 12″ (more on request!)

Horizontal capacity from column to the indenter 190 mm / 7.5” (more on request!)

Brinell hardness testers LD3000 serie are a robusts, reliable systems, designed to function even in hostile environments. In fact, heavy and bulky samples can be easily placed using a forklift or overhead-traveling crane.

AUTO-COMPENSATION OF ALL DEFLECTIONS

When testing unstable samples or deflecting parts, the AFFRI System will follow the sample without losing contact thanks to its infinite stroke for indenter and clamping hood.

Load forces are applied through load cells and controlled in “Closed Loop” with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.
Accurate measurements on the first test, even in extreme conditions, eliminate the need for repeated tests. The R&R data is at the top of its class.

THE BRINELL SOFTWARE

Everything is under control! The pre-installed software drives the whole instrument during the entire hardness test cycle.

• Touchscreen gloves sensitive
• User friendly software designed inhouse
• Color highlighted results (low/ok/high)
• Live statistics and graph
• Programs of test settings
• Results archives
• Export results to:
  PDF, TXT, CSV, DOD, XLS and more
• Data enter via code bar scanning
• Outputs via RS232, USB and Ethernet
• Data exchange with management system MES

READY FOR 4.0